M4.5 x 0.75 taps 4.5x.75mm tap 4.5mm (REDUCED from £45.00)

Now Only
STPMM04.5x.75
:   kg
!
M4.5 x 0.75 taps = 4.5x.75mm tap or 4.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS)  cuts into most stainless steel All in stock

M5 x 0.5 taps 5x.5mm tap (REDUCED from £41.50)

Now Only
STPMM05x.5
:   kg
!
M5 x 0.5 taps = 5x.5mm tap or 5x0.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel aAl in stock

M5 x 0.75 taps 5x.75mm tap (REDUCED from £41.50)

Now Only
STPMM05x.75
:   kg
!
M5 x 0.75 taps = 5x.75mm tap or 5x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M5 x .8 taps 5x.8mm tap 5mm (REDUCED from £8.82)

Now Only
STPMM05
:   kg
!
M5 x .8 taps = 5x.8mm tap or 5mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel all in stock - BUY 36pcs @ £2.40 each by phoning us

HSS M5 x .8 taps 5x.8mm tap 5mm

Now Only
HTPMM05
:   kg
!
M5 x 0.8 taps = 5x0.8mm tap or 5mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M5 x .8 taps 5x.8mm 5mm Gun Nose Spoon tap

Now Only
HTSPMM05
:   kg
!
Spiral Point HSS M5 x .8 taps = 5x.8mm = 5mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M5 x 0.9 taps 5x.9mm tap (REDUCED from £41.50)

Now Only
STPMM05x.9
:   kg
!

M5 x 0.9 taps = 5x.9mm tap or 5x0.9mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M5 x 1 taps 5x1mm tap (REDUCED from £53.00)

Now Only
STPMM05x1
:   kg
!
M5 x 1 taps = 5x1mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into smost tainless steel all in stock

M5.5 x 0.9 taps 5.5x.9mm tap 5.5mm (REDUCED from £45.00)

Now Only
STPMM05.5x.9
:   kg
!
M5.5 x 0.9 taps = 5.5x.9mm tap or 5.5x0.9mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M6 x 0.5 taps 6x.5mm tap (REDUCED from £41.50)

Now Only
STPMM06x.5
:   kg
!
M6 x 0.5 taps = 6x.5mm tap or 6x0.5mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into stainless most steel All in stock

M6 x 0.75 taps 6x.75mm tap (REDUCED from £41.50)

Now Only
STPMM06x.75
:   kg
!
M6 x 0.75 taps = 6x.75mm tap or 6x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M6 x 1 taps 6x1mm tap 6mm (REDUCED from £8.26)

Now Only
STPMM06
:   kg
!
M6 x 1 taps = 6x1mm tap = 6mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £2.40 each by phoning us

HSS M6 x 1 taps 6x1mm tap 6mm

Now Only
HTPMM06
:   kg
!
M6 x 1 taps = 6x1mm tap or 6mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M6 x 1 taps 6x1mm 6mm Gun Nose Spoon tap

Now Only
HTSPMM06
:   kg
!
Spiral Point HSS M6 x 1 taps = 6x1mm = 6mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M7 x 0.75 taps 7x.75mm tap (REDUCED from £43.00)

Now Only
STPMM07x.75
:   kg
!
M7 x 0.75 taps = 7x.75mm tap or 7x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M7 x 1 taps 7x1mm tap 7mm (REDUCED from £16.21)

Now Only
STPMM07
:   kg
!
M7 x 1 taps = 7x1mm tap or 7mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M8 x 0.75 taps 8x.75mm tap (REDUCED from £53.10)

Now Only
STPMM08x.75
:   kg
!
M8 x 0.75 taps = 8x.75mm tap or 8x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M8 x 1 taps 8x1mm tap (REDUCED from £41.50)

Now Only
STPMM08x1
:   kg
!
M8 x 1mm taps = 8x1mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into stainless most steel All in stock

M8 x 1.25 taps 8x1.25mm tap 8mm (REDUCED from £9.22)

Now Only
STPMM08
:   kg
!
M8 x 1.25 taps = 8x1.25mm tap 8mm Standard made in taper second bottom / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £3.60 each by phoning us

HSS M8 x 1.25 taps 8x1.25mm tap 8mm

Now Only
HTPMM08
:   kg
!
M8 x 1.25 taps - 8x1.25mm tap or 8mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M8 x 1.25 taps 8x1.25mm 8mm Gun Nose Spoon tap

Now Only
HTSPMM10
:   kg
!
Spiral Point HSS M8 x 1.25 taps = 8x1.25mm = 8mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M9 x 1 taps 9x1mm tap (REDUCED from £53.10)

Now Only
STPMM09x1
:   kg
!
M9 x 1 taps = 9x1mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into smost tainless steel All in stock

M9 x 1.25 taps 9x1.25mm tap 9mm (REDUCED from £20.16)

Now Only
STPMM09
:   kg
!
M9 x 1.25 taps = 9x1.25mm tap or 9mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel all in stock

M10 x 0.75 taps 10x.75mm tap (REDUCED from £53.10)

Now Only
STPMM10x.75
:   kg
!
M10 x 0.75 taps = 10x.75mm tap or 10x0.75mm made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M10 x 1 taps 10x1mm tap (REDUCED from £41.50)

Now Only
STPMM10x1
:   kg
!
M10 x 1 taps = 10x1 tap tap spark-plug made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel all in stock

M10 x 1.25 taps 10x1.25mm tap (REDUCED from £41.50)

Now Only
STPMM10x1.25
:   kg
!
M10 x 1.25 taps = 10x1.25mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock

M10 x 1.5 taps 10x1.5mm tap 10mm (REDUCED from £11.79)

Now Only
STPMM10
:   kg
!
M10 x 1.5 taps = 10x1.5mm tap or 10mm Standard made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock - BUY 36pcs @ £3.60 each by phoning us

HSS M10 x 1.5 taps 10x1.5mm tap 10mm

Now Only
HTPMM10
:   kg
!
M10 x 1.5 taps = 10x1.5mm tap or 10mm Standard made in taper second bottom / plug SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

Spiral Point HSS M10 x 1.5 taps 10x1.5mm 10mm Gun Nose Spoon tap

Now Only
HTSPMM10
:   kg
!
Spiral Point HSS M10 x 1.5 taps = 10x1.5mm = 10mm Gun Nose Spoon tap pushes chips forward, in through holes, SUPERIOR HSS GT (High Speed Steel Ground Thread) made to precision ISO 529 for machine or hand tapping, cuts stainless steel - all in stock

M11 x 0.75 taps 11x.75mm tap (REDUCED from 45.00)

Now Only
STPMM11x.75
:   kg
!
M11 x 0.75 taps = 11x.75mm metric tap = 11x0.75mm tap made in taper second bottoming / plug EXCELLENT 1st quality HQS (Highest Quality Steel, considered a tougher and better alternative to HSS) cuts even into most stainless steel All in stock