HBNSI32 - 526A
Weight: kg
1/2 Ball Nose Slot drill 1/2" Ballnose Slot Cutters

1/2 Ball Nose Slot drill 1/2" Ballnose Slot Cutters

1/2" diameter 2-flute Ball Nose Slot Drills / Mills HSS x 1/2" threaded shank x 3/4" cut length x 2-5/8" total length (Long Series Ball Nose Slot Drills / Mills also stocked - ask)

Used for milling ball-end slots with a radius bottom, die-sinking, fillets, rounding bottoms of holes, pattern-making etc Are end-cutting to centre the initial penetration and can be 'plunge' fed. Have 2-flutes, threaded-shank. Excellent quality British-made to BS122 part 4

Click on  Ball Nose Slot Drill Inch  to buy sizes from 1/16" to 1-1/2" 
OR  view 
CUTTERS - shank type  for Endmills, Slot Drills, Ball Nose, T-Slot, Corner Rounding, Dovetail, Inverted Dovetail, Woodruff Keyseating
OR  view CUTTERS - bore type  for Cylindrical Mill, Involute Gear, Single Angle, Equal Double Angle, Convex, Concave, Side and Face Slot Cutters

- View what customers say about Us Satisfied customers include Rolls Royce, British Petroleum, Exxon Mobil Chemical, British Airways Avionics, Scottish Power Energy, etc