Tapping Drills HSS for Model Engineer 32tpi + 40tpi ME taps

Page shows HSS Tapping Drill for Model Engineer 32tpi + 40 tpi taps 1/8x40, 5/32x32, 5/32x40, 3/16x32, 3/16x40, 7/32x32, 7/32x40, 1/4x32, 1/4x40, 9/32x32, 9/32x40, 5/16x32, 5/16x40, 3/8x32, 3/8x40, 7/16x32, 7/16x40, 1/2x32,1/2x40

Tapping drill for 1/8x40 ME tap Use 2.55mm straight shank Drill HSS
Now Only
HDM02.55 - 150
:   kg
!
Tapping drill for 1/8x40 ME tap Use 2.55mm = 2.3mm straight shank Drill HSS
More details

Tapping drill for 5/32x32 ME tap Use 3.2mm straight shank Drill HSS
Now Only
HDM03.20 - 150
:   kg
!
Tapping drill for 5/32x32 ME tap Use 3.2mm straight shank Drill HSS
More details

Tapping drill for 5/32x40 ME tap Use 3.3mm straight shank Drill HSS
Now Only
HDM03.30 - 150
:   kg
!
Tapping drill for 5/32x40 ME tap Use 3.3mm straight shank Drill HSS
More details

Tapping drill for 3/16x32 ME tap Use 4mm straight shank Drill HSS
Now Only
HDM04.00 - 150
:   kg
!
Tapping drill for 3/16x32 ME tap Use 4mm straight shank Drill HSS
More details

Tapping drill for 3/16x40 ME tap Use 4mm straight shank Drill HSS
Now Only
HDM04.00 - 150
:   kg
!
Tapping drill for 3/16x40 ME tap Use 4mm straight shank Drill HSS
More details

Tapping drill for 7/32x32 ME tap Use 4.8mm straight shank Drill HSS
Now Only
HDM04.80 - 150
:   kg
!
Tapping drill for 7/32x32 ME tap Use 4.8mm straight shank Drill HSS
More details

Tapping drill for 7/32x40 ME tap Use 4.8mm straight shank Drill HSS
Now Only
HDM04.80 - 150
:   kg
!
Tapping drill for 7/32x40 ME tap Use 4.8mm straight shank Drill HSS
More details

Tapping drill for 1/4x32 ME tap Use 5.5mm straight shank Drill HSS
Now Only
HDM05.50 - 150
:   kg
!
Tapping drill for 1/4x32 ME tap Use 5.5mm straight shank Drill HSS
More details

Tapping drill for 1/4x40 ME tap Use 5.5mm straight shank Drill HSS
Now Only
HDM05.50 - 150
:   kg
!
Tapping drill for 1/4x40 ME tap Use 5.5mm straight shank Drill HSS
More details

Tapping drill for 9/32x32 ME tap Use 6.1mm straight shank Drill HSS
Now Only
HDM06.10 - 150
:   kg
!
Tapping drill for 9/32x32 ME tap Use 6.1mm straight shank Drill HSS
More details

Tapping drill for 9/32x40 ME tap Use 6.2mm straight shank Drill HSS
Now Only
HDM06.20 - 150
:   kg
!
Tapping drill for 9/32x40 ME tap Use 6.2mm straight shank Drill HSS
More details

Tapping drill for 5/16x32 ME tap Use 7mm straight shank Drill HSS
Now Only
HDM07.00 - 150
:   kg
!
Tapping drill for 5/16x32 ME tap Use 7mm straight shank Drill HSS
More details

Tapping drill for 5/16x40 ME tap Use 7.3mm straight shank Drill HSS
Now Only
HDM07.30 - 150
:   kg
!
Tapping drill for 5/16x40 ME tap Use 7.3mm straight shank Drill HSS
More details

Tapping drill for 3/8x32 ME tap Use 8.6mm straight shank Drill HSS
Now Only
HDM08.60 - 150
:   kg
!
Tapping drill for 3/8x32 ME tap Use 8.6mm straight shank Drill HSS
More details

Tapping drill for 3/8x40 ME tap Use 8.9mm straight shank Drill HSS
Now Only
HDM08.90 - 150
:   kg
!
Tapping drill for 3/8x40 ME tap Use 8.9mm straight shank Drill HSS
More details

Tapping drill for 7/16x32 ME tap Use 10.3mm straight shank Drill HSS
Now Only
HDM10.30 - 150
:   kg
!
Tapping drill for 7/16x32 ME tap Use 10.3mm straight shank Drill HSS
More details

Tapping drill for 7/16x40 ME tap Use 10.5mm straight shank Drill HSS
Now Only
HDM10.50 - 150
:   kg
!
Tapping drill for 7/16x40 ME tap Use 10.5mm straight shank Drill HSS
More details

Tapping drill for 1/2x32 ME tap Use 11.9mm straight shank Drill HSS
Now Only
HDM11.90 - 150
:   kg
!
Tapping drill for 1/2x32 ME tap Use 11.9mm straight shank Drill HSS
More details

Tapping drill for 1/2x40 ME tap Use 12mm straight shank Drill HSS
Now Only
HDM12.00 - 150
:   kg
!
Tapping drill for 1/2x40 ME tap Use 12mm straight shank Drill HSS
More details