taps dies drills LARGEST on-line

The Tap & Die Co (established 1978)

Taps Dies Dienuts Drills Reamer Excellent Quality Price Service despatch SAMEDAY

End Mills Metric

Endmills Metric sizes 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm endmill 6.5mm 7mm 8mm 8.5mm 9mm 9.5mm 10mm 10.5mm 11mm 11.5mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm endmills 23mm 24mm 25mm 26mm 28mm 30mm 32mm 34mm 35mm 36mm 38mm 40mm 42mm 44mm 45mm 50mm used for profile milling finishing Produces openend slots pockets Right hand Plain flatted shank British made

2.5mm Endmill M2.5 End Mills Cobalt

Now Only

CEM02.5 - 620A

: kg

!

2.5mm = M2.5 diameter End Mill Super Cobalt x 6mm threaded shank x 6.5mm cut length x 51mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

3mm Endmill M3 End Mills Cobalt

Now Only

CEM03 - 620A

: kg

!

3mm = M3 diameter End Mill Super Cobalt x 6mm threaded shank x 9.5mm cut length x 54mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

3.5mm Endmill M3.5 End Mills Cobalt

Now Only

CEM03.5 - 620A

: kg

!

3.5mm = M3.5 diameter End Mill Super Cobalt x 6mm threaded shank x 12.5mm cut length x 57mm total length x 4z Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask

4mm Endmill M4 End Mills Cobalt

Now Only

CEM04 - 620A

: kg

!

4mm = M4 diameter End Mill Cobalt x 6mm threaded shank x 12.5mm cut length x 57mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

4.5mm Endmill M4.5 End Millst Cobalt

Now Only

CEM04.5 - 620A

: kg

!

4.5mm = M4.5 diameter End Mill Super Cobalt x 6mm threaded shank x 12.5mm cut length x 57mm total length x 4z Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

5mm Endmill M5 End Mills Cobalt

Now Only

CEM05 - 620A

: kg

!

5mm diameter End Mill Super Cobalt x 6mm threaded shank x 16mm cut length x 60.5mm total length x 4z Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

5.5mm Endmill M5.5 End Mills Cobalt

Now Only

CEM05.5 - 620A

: kg

!

5.5mm = M5 diameter End Mill Super Cobalt x 6mm threaded shank x 16mm cut length x 60.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

6mm Endmill M6 End Mills Cobalt

Now Only

CEM06 - 620A

: kg

!

6mm = M6 diameter End Mill Super Cobalt x 6mm threaded shank x 16mm cut length x 60.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

6.5mm Endmill M6.5 End Mills Cobalt

Now Only

CEM06.5 - 620A

: kg

!

6.5mm = M6.5 diameter End Mill Super Cobalt x 10mm threaded shank x 16mm cut length x 60.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

7mm Endmill M7 End Mills Cobalt

Now Only

CEM07 - 620A

: kg

!

7mm = M7 diameter End Mill Super Cobalt x 10mm threaded shank x 15mm cut length x 60.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

7.5mm Endmill M7.5 End Millt Cobalt

Now Only

CEM07.5 - 620A

: kg

!

7.5mm = M7.5 diameter End Mill Super Cobalt x 10mm threaded shank x 18mm cut length x 63.5mm total length x 4zMilling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

8mm Endmill M8 End Mills Cobalt

Now Only

CEM08 - 620A

: kg

!

8mm diameter End Mill Super Cobalt x 10mm threaded shank x 18mm cut length x 63.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

9mm Endmill M9 End Mills Cobalt

Now Only

CEM09 - 620A

: kg

!

9mm = M9 diameter End Mill Super Cobalt x 10mm threaded shank x 21mm cut length x 66.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

10mm Endmill M10 End Mills Cobalt

Now Only

CEM10 - 620A

: kg

!

10mm = M10 diameter End Mill Super Cobalt x 10mm threaded shank x 21mm cut length x 6.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

11mm Endmill M11 End Mills Cobalt

Now Only

CDM11 - 620A

: kg

!

11mm = M11 diameter End Mill Super Cobalt x 12mm threaded shank x 19mm cut length x 66.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

12mm Endmill M12 End Mills Cobalt

Now Only

CEM12 - 620A

: kg

!

12mm = M12 diameter End Mill Super Cobalt x 12mm threaded shank x 24mm cut length x 70mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

13mm Endmill M13 End Mills Cobalt

Now Only

CEM13 - 620A

: kg

!

13mm = M13 diameter End Mill Super Cobalt x 12mm threaded shank x 24.5mm cut length x 70mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

14mm Endmill M14 End Mills Cobalt

Now Only

CEM14 - 620A

: kg

!

14mm = M14 diameter End Mill Super Cobalt x 12mm threaded shank x 28.5mm cut length x 73mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

15mm Endmill M15 End Mills Cobalt

Now Only

CEM15 - 620A

: kg

!

15mm = M15 diameter End Mill Super Cobalt x 16mm threaded shank x 26.5mm cut length x 77mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

16mm Endmill M16 End Mills Cobalt

Now Only

CEM16 - 620A

: kg

!

16mm = M16 diameter End Mill Super Cobalt x 16mm threaded shank x 26.5mm cut length x 77mm total length x 4z
Milling Cutters (Plain + Flatted + Long Series Endmills shank also stocked - ask)

17mm Endmill M17 End Mills Cobalt

Now Only

CEM17 - 620A

: kg

!

17mm diameter End Mill Super Cobalt x 16mm threaded shank x 32mm cut length x 80mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

18mm Endmill M18 End Mills Cobalt

Now Only

CEM18 - 620A

: kg

!

18mm = M18 diameter End Mill Super Cobalt x 16mm threaded shank x 35mm cut length x 80mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

19mm Endmill M19 End Mills Cobalt

Now Only

CEM19 - 620A

: kg

!

19mm = M19 diameter End Mill Super Cobalt x 16mm threaded shank x 38mm cut length x 83.5mm total length x 4z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

20mm Endmill M20 End Mills Cobalt

Now Only

CEM20 - 620A

: kg

!

20mm = M20 diameter End Mill Super Cobalt x 16mm threaded shank x 38mm cut length x 83.5mm total length x 4zMilling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

22mm Endmill M22 End Mills Cobalt

Now Only

CEM22 - 620A

: kg

!

22mm = M22 diameter End Mill Super Cobalt x 25mm threaded shank x 41.5mm cut length x 98.5mm total length x 6z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

Endmills used for profile milling/finishing but not sinking (end teeth are not over-centre cutting) - Produces openend slots or pockets (where plunge feed-in is not required) - End Mills Straight Screwed Shank Inch sizes to BSS122 Part 4 - Right hand cutting - Plain or flatted shank in DIN also in stock - please ask

View what customers say about Us

!