Set containing BOTTOM also called BOTTOMINGS / PLUGS taps  consisting of

1 second tap covering sizes:-

2 BA = 2 BA = 4.7mm dia. with 31.4 tpi tap bottom

4 BA = 4 BA = 3.6mm dia. with 38.5 tpi tap bottom

5 BA = 5 BA = 3.2mm dia. with 43.0 tpi tap bottom

6 BA = 6 BA = 2.8mm dia. with 47.9 tpi tap bottom

7 BA = 7 BA = 2.5mm dia. with 52.9 tpi tap bottom

8 BA = 8 BA = 2.2mm dia. with 59.1 tpi tap bottom

10 BA = 10 BA = 1.7mm dia. with 72.6 tpi tap bottom

To BUY 1 lot or more of the above (not in metal box) click on the 'Add to basket' icon

These taps cannot be compared with other suppliers, as they are superior quality. They are used for cutting internal threads, in most steel, including stainless. If these taps are cared for & used correctly then they should last a long time, as found by our customers since 1970's. By ordering this set, you are buying superior quality taps at the LOWEST prices, direct from the 'source' of supply of these tools

Note: To buy holders for taps, please click on lefthand-menu showing ' Tap holders'