CEM30 - 620A
Weight: kg
30mm Endmill M30 End Mills

30mm Endmill M30 End Mills Cobalt Cutters

30mm = M30 diameter End Mill Super Cobalt x 25mm threaded shank x 46mm cut length x 104.5mm total length x 6z
Milling Cutters (Plain + Flatted shank + Long Series Endmills also stocked - ask)

Used for profile milling / finishing but not sinking to produce open-end pockets or slots where pluge-feed in is not required. They are multi-flute with threaded-shank. Excellent quality British-made to BS122 part

Click on  End Mills Cobalt Metric  to buy sizes from 1.5mm to 50mm
OR  view 
CUTTERS - shank type  for Endmills, Slot Drills, Ball Nose, T-Slot, Corner Rounding, Dovetail, Inverted Dovetail, Woodruff Keyseating
OR  view CUTTERS - bore type  for Cylindrical Mill, Involute Gear, Single Angle, Equal Double Angle, Convex, Concave, Side and Face Slot Cutters

- View what customers say about Us Satisfied customers include Rolls Royce, British Petroleum, Exxon Mobil Chemical, British Airways Avionics, Scottish Power Energy, etc